PartsTable
Technical Data Sheet
Download PDF

64A114B62-1 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

64A114B62-1: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.406 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-932-5582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64A114B62-1
NSN: 5310-00-932-5582
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.406 INCHES NOMINAL IN
thread_class3B
thread_seriesUNS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats1.481 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch14
NSN5310-00-932-5582
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 64A114B62-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.481 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
•
THREAD SERIES: UNS
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
NUT HEIGHT: 0.406 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: SLOTTED, HEXAGON
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.481 INCHES MINIMUM AND 1.502 INCHES MAXIMUM IN
THREAD SERIESUNS
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
NUT HEIGHT0.406 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH14
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
00842Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
62A81D8-7Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 64A114B62-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64A114B62-1?
64A114B62-1 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace 64A114B62-1?
There are 2 known substitutes for 64A114B62-1: 00842, 62A81D8-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 64A114B62-1?
64A114B62-1 is cataloged in the U.S. Government catalog under NSN 5310-00-932-5582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64A114B62-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.