PartsTable
Technical Data Sheet
Download PDF

64955 — RUDDER,AIRCRAFT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

64955: RUDDER,AIRCRAFT.

The RUDDER,AIRCRAFT is a the manufacturer industrial component. Key specifications include end_item_identification: WASP AE SYSTEM M3/M4 UNMANNED AIRCRAFT, part_name_assigned_by_controlling_agency: ASSY,RUDDER,TRANSPARENT,WASP AE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-584-0266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64955
NSN: 5331-00-584-0266
NIINs: 005840266, 016279289
FSC: 5331 — O-ring
CAGE: 33667 — KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS (USA)
SPECIFICATIONS
end_item_identificationWASP AE SYSTEM M3/M4 UNMANNED AIRCRAFT
part_name_assigned_by_controlling_agencyASSY,RUDDER,TRANSPARENT,WASP AE
NSN5331-00-584-0266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 64955 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
SPECIAL FEATURESDO NOT USE ON THE T-55 TURBINE ENGINE
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
101-00500Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28775-010Reference document
Same NSN cross-reference
Reference document — Secondary reference
58-010-15Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
146186Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ORAR00010-N9038Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
100-010Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 64955?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64955?
64955 is a RUDDER,AIRCRAFT.
What parts can replace 64955?
There are 10 known substitutes for 64955: 101-00500, MS28775-010, 58-010-15 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 64955?
64955 is cataloged in the U.S. Government catalog under NSN 5331-00-584-0266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64955