PartsTable
Technical Data Sheet
Download PDF

6436-10-400-9101 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6436-10-400-9101: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4130 OVERALL, thickness: 0.093 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, hole_diameter: 0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM IN, surface_finish: 90.0 MICROINCHES ALL SURFACES, hardness_rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM, overall_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-124-8229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6436-10-400-9101
NSN: 5310-01-124-8229
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 4130 OVERALL
thickness0.093 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
hole_diameter0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM IN
surface_finish90.0 MICROINCHES ALL SURFACES
hardness_rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
overall_diameter0.750 INCHES NOMINAL IN
special_featuresFLAT AREA OF WASHER TO BE TANGENT TO 0.500 IN. RADIUS BOTH SIDES IN
surface_treatmentCADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-124-8229
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6436-10-400-9101 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 90.0 MICROINCHES ALL SURFACES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY 3,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000,COND C MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758,COND C MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758,COND D MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH90.0 MICROINCHES ALL SURFACES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY 3,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.750 INCHES NOMINAL IN
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000,COND C MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758,COND C MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758,COND D MIL SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESFLAT AREA OF WASHER TO BE TANGENT TO 0.500 IN. RADIUS BOTH SIDES IN
SURFACE TREATMENTCADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
PERIPHERAL SHAPE STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6436-10-400-9101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6436-10-400-9101?
6436-10-400-9101 is a WASHER,FLAT.
What is the NSN for 6436-10-400-9101?
6436-10-400-9101 is cataloged in the U.S. Government catalog under NSN 5310-01-124-8229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6436-10-400-9101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.