PartsTable
Technical Data Sheet
Download PDF

6435-20179-102 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6435-20179-102: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, thickness: 0.177 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, hole_diameter: 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, hardness_rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM, overall_diameter: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, surface_treatment: SILVER OR NICKEL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-349-9250, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6435-20179-102
NSN: 5310-00-349-9250
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
thickness0.177 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
hole_diameter0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
hardness_rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
overall_diameter1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
surface_treatmentSILVER OR NICKEL OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-5000,COND C MIL SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE OR SS8488,FSCM 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-349-9250
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6435-20179-102 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE OR SS8488,FSCM 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000,COND C MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: SILVER OR NICKEL OVERALL
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE OR SS8488,FSCM 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000,COND C MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTSILVER OR NICKEL OVERALL
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 4340 OVERALL
CENTER HOLE SHAPE STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 6435-20179-102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6435-20179-102?
6435-20179-102 is a WASHER,FLAT.
What is the NSN for 6435-20179-102?
6435-20179-102 is cataloged in the U.S. Government catalog under NSN 5310-00-349-9250. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6435-20179-102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.