PartsTable
Technical Data Sheet
Download PDF

6435-20047-108 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6435-20047-108: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: ROUND, nut_diameter: 3.355 INCHES NOMINAL IN, thread_class: 3B, nut_thickness: 0.344 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-938-9514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6435-20047-108
NSN: 5310-00-938-9514
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_styleROUND
nut_diameter3.355 INCHES NOMINAL IN
thread_class3B
nut_thickness0.344 INCHES NOMINAL IN
thread_seriesUN
hardness_rating26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
flange_thickness0.199 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL BOTH ENDS
drive_point_depth0.094 INCHES NOMINAL IN
drive_point_width0.250 INCHES NOMINAL IN
NSN5310-00-938-9514
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6435-20047-108 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.199 INCHES NOMINAL IN
•
THREAD SERIES: UN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
DRIVE POINT WIDTH: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.875 INCHES IN
•
NUT DIAMETER: 3.355 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE THICKNESS0.199 INCHES NOMINAL IN
THREAD SERIESUN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
HOLE CONFIGURATION STYLECONFIGURATION F
DRIVE POINT WIDTH0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.875 INCHES IN
NUT DIAMETER3.355 INCHES NOMINAL IN
DRIVE POINT DEPTH0.094 INCHES NOMINAL IN
UNDERCUT THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
S6435-20047-108Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 6435-20047-108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6435-20047-108?
6435-20047-108 is a NUT,PLAIN,ROUND.
What parts can replace 6435-20047-108?
There is 1 known substitute for 6435-20047-108: S6435-20047-108. Substitute compatibility should be verified for your specific system.
What is the NSN for 6435-20047-108?
6435-20047-108 is cataloged in the U.S. Government catalog under NSN 5310-00-938-9514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6435-20047-108