PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 642A694-038
642A694-038 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, outside_diameter: 2.441 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-063-1024, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
642A694-038
NSN: 5330-00-063-1024
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
outside_diameter2.441 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.437 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-063-1024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 642A694-038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.441 INCHES NOMINAL IN
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HOUSING BORE DIAMETER: 2.437 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.441 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HOUSING BORE DIAMETER2.437 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING CASE
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
16117Interchangeable
interchangeable cross-reference
interchangeable
FFS85TYPE2STYLE10PInterchangeable
interchangeable cross-reference
interchangeable
26946Interchangeable
interchangeable cross-reference
interchangeable
463-707Interchangeable
interchangeable cross-reference
interchangeable
112-2Interchangeable
interchangeable cross-reference
interchangeable
10280Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 642A694-038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 642A694-038?
642A694-038 is a SEAL,PLAIN ENCASED.
What parts can replace 642A694-038?
There are 12 known substitutes for 642A694-038: 16117, FFS85TYPE2STYLE10P, 26946 and 9 more. Substitute compatibility should be verified for your specific system.
Is 642A694-038 still available?
642A694-038 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 642A694-038

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026