6422K43 — HANDLE,MANUAL CONTROL

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

6422K43: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM AND IRON CAST OVERALL, overall_length: 4.750 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), special_features: THREAD HOLE 0.500-13; OVERALL HEIGHT 2.250 NOMINAL INCH; HUB DIA. 1.125 NOMINAL INCH; OVERALL LENGTH 4.750 NOMINAL INCH, thread_direction: RIGHT-HAND, surface_treatment: ZINC OVERALL.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-593-0801, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6422K43

NSN: 5340-01-593-0801
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)

SPECIFICATIONS

material	ALUMINUM AND IRON CAST OVERALL
overall_length	4.750 INCHES NOMINAL IN
mounting_method	THREADED HOLE(S)
special_features	THREAD HOLE 0.500-13; OVERALL HEIGHT 2.250 NOMINAL INCH; HUB DIA. 1.125 NOMINAL INCH; OVERALL LENGTH 4.750 NOMINAL INCH
thread_direction	RIGHT-HAND
surface_treatment	ZINC OVERALL
end_item_identification	3805-01-573-0677 EXCAVATOR, MULTIPURPOSE, CRAWLER MOUNTER
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity	1
part_name_assigned_by_controlling_agency	HANDLE WITH SOLD HUB
NSN	5340-01-593-0801

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY QUANTITY: 1

•

MOUNTING METHOD: THREADED HOLE(S)

•

THREAD DIRECTION: RIGHT-HAND

•

SURFACE TREATMENT: ZINC OVERALL

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY QUANTITY	1
MOUNTING METHOD	THREADED HOLE(S)
OVERALL LENGTH	4.750 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND
SPECIAL FEATURES	THREAD HOLE 0.500-13; OVERALL HEIGHT 2.250 NOMINAL INCH; HUB DIA. 1.125 NOMINAL INCH; OVERALL LENGTH 4.750 NOMINAL INCH
SURFACE TREATMENT	ZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	HANDLE WITH SOLD HUB
END ITEM IDENTIFICATION	3805-01-573-0677 EXCAVATOR, MULTIPURPOSE, CRAWLER MOUNTER
MATERIAL	ALUMINUM AND IRON CAST OVERALL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

6422K430Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 6422K43?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6422K43?

6422K43 is a HANDLE,MANUAL CONTROL.

What parts can replace 6422K43?

There is 1 known substitute for 6422K43: 6422K430. Substitute compatibility should be verified for your specific system.

What is the NSN for 6422K43?

6422K43 is cataloged in the U.S. Government catalog under NSN 5340-01-593-0801. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6422K43 — HANDLE,MANUAL CONTROL

Request a Quote — 6422K43