PartsTable
Technical Data Sheet
PartsTable / MRO / 641119
641119 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

HOLDER ASSEMBLY,ELECTRICAL CONTA. Key specifications include body_width: 1.156 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN, body_height: 2.940 INCHES NOMINAL IN, body_length: 1.656 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN, body_material: METAL, bore_diameter: 0.5625 INCHES NOMINAL IN, overall_width: 0.3750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5880, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 641119
NSN: 3110-00-112-5880
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
body_width1.156 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
body_height2.940 INCHES NOMINAL IN
body_length1.656 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
body_materialMETAL
bore_diameter0.5625 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
alignment_typeRIGID
inclosure_typeHERMETICALLY SEALED
overall_height3.630 INCHES NOMINAL IN
overall_length2.432 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
features_providedMOISTURE RESISTANT AND SHOCK RESISTANT
NSN3110-00-112-5880
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 641119 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
BORE DIAMETER: 0.5625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.3750 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER0.5625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
GB-1112Interchangeable
interchangeable cross-reference
interchangeable
B610PInterchangeable
interchangeable cross-reference
interchangeable
GB610Interchangeable
interchangeable cross-reference
interchangeable
AS20659Interchangeable
interchangeable cross-reference
interchangeable
B-418-38Interchangeable
interchangeable cross-reference
interchangeable
Y18984CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 641119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 641119?
641119 is a HOLDER ASSEMBLY,ELECTRICAL CONTA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 641119?
There are 18 known substitutes for 641119: GB-1112, B610P, GB610 and 15 more. Substitute compatibility should be verified for your specific system.
Is 641119 still available?
641119 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 641119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026