PartsTable
Technical Data Sheet
Download PDF

64040H4-17 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

64040H4-17: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN, thread_length: 0.377 INCHES MINIMUM IN, screw_material: STEEL COMP H11, fastener_length: 1.439 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-928-9599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64040H4-17
NSN: 5305-00-928-9599
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
thread_length0.377 INCHES MINIMUM IN
screw_materialSTEEL COMP H11
fastener_length1.439 INCHES NOMINAL IN
hardness_rating50.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle60.0 DEGREES NOMINAL
internal_drive_styleTORQUE SET
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM OR NICKEL
NSN5305-00-928-9599
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 64040H4-17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM OR NICKEL
•
FASTENER LENGTH: 1.439 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.377 INCHES MINIMUM IN
•
HARDNESS RATING: 50.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM OR NICKEL
FASTENER LENGTH1.439 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.377 INCHES MINIMUM IN
HARDNESS RATING50.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP H11
MINIMUM TENSILE STRENGTH215000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
CS318642H4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC1023H4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HR101H4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VT1039H4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 64040H4-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64040H4-17?
64040H4-17 is a SCREW,MACHINE.
What parts can replace 64040H4-17?
There are 4 known substitutes for 64040H4-17: CS318642H4-17, AIC1023H4-17, HR101H4-17 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 64040H4-17?
64040H4-17 is cataloged in the U.S. Government catalog under NSN 5305-00-928-9599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64040H4-17