PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 640147P5
640147P5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.3750 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, overall_width: 0.3590 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.0390 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-397-0839, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
640147P5
NSN: 5340-01-397-0839
FSC: 5340
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
diameter0.3750 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
overall_width0.3590 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.0390 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.5890 INCHES MINIMUM AND 0.6010 INCHES MAXIMUM IN
NSN5340-01-397-0839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 640147P5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DIAMETER: 0.0390 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM IN
•
DIAMETER: 0.3750 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.5890 INCHES MINIMUM AND 0.6010 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIAL DIAMETER0.0390 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM IN
DIAMETER0.3750 INCHES NOMINAL IN
OVERALL WIDTH0.3590 INCHES MINIMUM AND 0.3910 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.5890 INCHES MINIMUM AND 0.6010 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
22CC37D0375Upgraded Successor
successor cross-reference
successor
7934Upgraded Successor
successor cross-reference
successor
21049Interchangeable
interchangeable cross-reference
interchangeable
50573Interchangeable
interchangeable cross-reference
interchangeable
21049EInterchangeable
interchangeable cross-reference
interchangeable
6LNInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 640147P5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 640147P5?
640147P5 is a CLAMP,LOOP.
What parts can replace 640147P5?
There are 12 known substitutes for 640147P5: 22CC37D0375, 7934, 21049 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 640147P5?
640147P5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-397-0839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 640147P5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026