PartsTable
Technical Data Sheet
Download PDF

64-7-312-5 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

64-7-312-5: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, material: STEEL COMP 1018 OR STEEL COMP 1020 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.062 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OUTSIDE DIAMETER. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-153-9118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64-7-312-5
NSN: 5315-00-153-9118
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 04984 — CELTECH CORPORATION DIV USE CAGE 65552 FOR ALL ORDERS (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
materialSTEEL COMP 1018 OR STEEL COMP 1020 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.062 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OUTSIDE DIAMETER
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter1.500 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
under_head_length4.625 INCHES NOMINAL IN
first_hole_diameter0.219 INCHES NOMINAL IN
NSN5315-00-153-9118
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 64-7-312-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OUTSIDE DIAMETER
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PS30,04984 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 4.625 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER
CHAMFER LENGTH0.062 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPS30,04984 MFR REF SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH4.625 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.219 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1018 OR AISI 1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 64-7-312-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64-7-312-5?
64-7-312-5 is a PIN,STRAIGHT,HEADED.
What is the NSN for 64-7-312-5?
64-7-312-5 is cataloged in the U.S. Government catalog under NSN 5315-00-153-9118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64-7-312-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.