PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 64-10-201-40
64-10-201-40 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 2.688 INCHES NOMINAL IN, length: 3.312 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: MATL:PADDLE STEEL,CUP STEEL;CUP CAD. PLATED,PADDLE CAD.

PLATED, surface_treatment: UNABLE TO DECODE. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-053-2585, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
64-10-201-40
NSN: 5340-01-053-2585
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
width2.688 INCHES NOMINAL IN
length3.312 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresMATL:PADDLE STEEL,CUP STEEL;CUP CAD. PLATED,PADDLE CAD. PLATED
surface_treatmentUNABLE TO DECODE
NSN5340-01-053-2585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 64-10-201-40 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: UNABLE TO DECODE
•
WIDTH: 2.688 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
LENGTH: 3.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTUNABLE TO DECODE
WIDTH2.688 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
SPECIAL FEATURESMATL:PADDLE STEEL,CUP STEEL;CUP CAD. PLATED,PADDLE CAD. PLATED
MATERIALUNABLE TO DECODE
LENGTH3.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
55586Interchangeable
interchangeable cross-reference
interchangeable
850823Interchangeable
interchangeable cross-reference
interchangeable
5F9576Interchangeable
interchangeable cross-reference
interchangeable
642113Interchangeable
interchangeable cross-reference
interchangeable
AS50045Interchangeable
interchangeable cross-reference
interchangeable
313-1879Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 64-10-201-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64-10-201-40?
64-10-201-40 is a CATCH,FLUSH.
What parts can replace 64-10-201-40?
There are 11 known substitutes for 64-10-201-40: 55586, 850823, 5F9576 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 64-10-201-40?
64-10-201-40 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-053-2585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64-10-201-40

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026