PartsTable
Technical Data Sheet
PartsTable / MRO / 64/35

64/35 — Technical Data Sheet

✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M Pro Series - Enclosure Holder Small 220mm is an optional part for the M Pro Series. Multibrackets M Pro Series - Enclosure Holder Small 220mm is a mount attaches directly to the enclosures mounting holes for a convenient and adjustable setup.<br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-017-0797, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 64/35
NSN: 4720-00-017-0797
FSC: 4720
CAGE: 81300 — PARKER-HANNIFIN CORPORATION DBA INDUSTRIAL HOSE PRODUCT DIVISION DIV HOSE PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
duty_typeCONTINUOUS
body_styleSTRAIGHT SHAPE, INTERNAL COUPLING
lug_length0.030 INCHES NOMINAL IN
scale_typeDIAL
shaft_typeROUND, SLOTTED SINGLE SHAFT
shell_typeSOLID
time_delay0.01 SECONDS NOMINAL FIXED OPERATE AND RELEASE TIME
cover_depth4.000 INCHES NOMINAL IN
temp_rating250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_depth28.000 INCHES NOMINAL IN
inside_width39.500 INCHES NOMINAL IN
NSN4720-00-017-0797
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 64/35 · Multibrackets ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
TEMP RATING: 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MEDIA FOR WHICH DESIGNED: ALCOHOL, METHYL AND ETHYLENE GLYCOL AND WATER, FRESH AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: D2 CLASS
•
OPERATING PRESSURE: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81343-SAE 20R3 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ETHYLENE GLYCOL RESISTANT AND HEAT RESISTANT AND OZONE RESISTANT
•
INSIDE SURFACE CONDITION: SMOOTH
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MEDIA FOR WHICH DESIGNEDALCOHOL, METHYL AND ETHYLENE GLYCOL AND WATER, FRESH AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
NONDEFINITIVE SPEC/STD DATAD2 CLASS
OPERATING PRESSURE50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-SAE 20R3 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OUTER COVERING ENVIRONMENTAL PROTECTIONETHYLENE GLYCOL RESISTANT AND HEAT RESISTANT AND OZONE RESISTANT
INSIDE SURFACE CONDITIONSMOOTH
MATERIALRUBBER SYNTHETIC TUBE
OUTSIDE DIAMETER0.856 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
KN-56-03Interchangeable
interchangeable cross-reference
interchangeable
TRU-2807Interchangeable
interchangeable cross-reference
interchangeable
258802Interchangeable
interchangeable cross-reference
interchangeable
457221Interchangeable
interchangeable cross-reference
interchangeable
X552AInterchangeable
interchangeable cross-reference
interchangeable
28432Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 64/35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 64/35?
64/35 is a CAPACITOR,VARIABLE,AIR DIELECTRI manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 64/35?
There are 23 known substitutes for 64/35: KN-56-03, TRU-2807, 258802 and 20 more. Substitute compatibility should be verified for your specific system.
Is 64/35 still available?
64/35 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 64/35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026