PartsTable / COMPONENT / 63X52
63X52
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE, housing_bore_diameter: 1.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8772, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X52
NSN: 5330-00-154-8772 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.375 INCHES NOMINAL IN surface_treatment CADMIUM CASE housing_bore_diameter 1.125 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.500 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-154-8772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X52
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
• SURFACE TREATMENT: CADMIUM CASE
• HOUSING BORE DIAMETER: 1.125 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• SEAL WIDTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR MATERIAL RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 0.500 INCHES NOMINAL IN MATERIAL STEEL CASE SURFACE TREATMENT CADMIUM CASE HOUSING BORE DIAMETER 1.125 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT SEAL WIDTH 0.375 INCHES NOMINAL IN CASE STYLE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
51060 Interchangeable interchangeable cross-reference
interchangeable
S6 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable interchangeable cross-reference
interchangeable
60055 Interchangeable interchangeable cross-reference
interchangeable
63X52 Interchangeable interchangeable cross-reference
interchangeable
6S6DC Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X52?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X52?
63X52 is a SEAL,PLAIN ENCASED.
What parts can replace 63X52?
There are 16 known substitutes for 63X52: 51060, S6, 00044 and 13 more. Substitute compatibility should be verified for your specific system.
Is 63X52 still available?
63X52 is currently cancelled.