PartsTable / COMPONENT / 63X50
63X50
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, housing_bore_diameter: 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-1332, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X50
NSN: 5330-00-285-1332 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN housing_bore_diameter 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.500 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 1600 FEET PER MINUTE FT NSN 5330-00-285-1332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X50
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
• MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN ACCOMMODATED SHAFT DIAMETER 0.500 INCHES NOMINAL IN HOUSING BORE DIAMETER 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 1600 FEET PER MINUTE FT MATERIAL LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT CASE STYLE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
21633 Interchangeable interchangeable cross-reference
interchangeable
114618 Interchangeable interchangeable cross-reference
interchangeable
BEAX4G Interchangeable interchangeable cross-reference
interchangeable
40000Z80 Interchangeable interchangeable cross-reference
interchangeable
4966 Interchangeable interchangeable cross-reference
interchangeable
40000780 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X50?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X50?
63X50 is a SEAL,PLAIN ENCASED.
What parts can replace 63X50?
There are 28 known substitutes for 63X50: 21633, 114618, BEAX4G and 25 more. Substitute compatibility should be verified for your specific system.
Is 63X50 still available?
63X50 is currently cancelled.