PartsTable / COMPONENT / 63X3863
63X3863
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, housing_bore_diameter: 0.750 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0896, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X3863
NSN: 5330-00-179-0896 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.250 INCHES NOMINAL IN housing_bore_diameter 0.750 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 0.250 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-179-0896
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X3863
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
• SEAL WIDTH: 0.250 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• HOUSING BORE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS MATERIAL RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 0.250 INCHES NOMINAL IN SEAL WIDTH 0.250 INCHES NOMINAL IN MATERIAL STEEL CASE SEALING ELEMENT STYLE ANGULAR CASE STYLE SQUARE HOUSING BORE DIAMETER 0.750 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
1298 Interchangeable interchangeable cross-reference
interchangeable
120073 Interchangeable interchangeable cross-reference
interchangeable
4450 Interchangeable interchangeable cross-reference
interchangeable
A-816116 Interchangeable interchangeable cross-reference
interchangeable
05185 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X3863?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X3863?
63X3863 is a SEAL,PLAIN ENCASED.
What parts can replace 63X3863?
There are 8 known substitutes for 63X3863: 1298, 120073, 4450 and 5 more. Substitute compatibility should be verified for your specific system.
Is 63X3863 still available?
63X3863 is currently cancelled.
Request a Quote — 63X3863