PartsTable / COMPONENT / 63X1504
63X1504
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 3.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-527-7325, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X1504
NSN: 5330-00-527-7325 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.375 INCHES NOMINAL IN housing_bore_diameter 3.500 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 2.250 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-527-7325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X1504
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
• SEAL WIDTH: 0.375 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 3.500 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR MATERIAL STEEL CASE ACCOMMODATED SHAFT DIAMETER 2.250 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT CASE STYLE SQUARE SEAL WIDTH 0.375 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
16305 Interchangeable interchangeable cross-reference
interchangeable
188-5252 Interchangeable interchangeable cross-reference
interchangeable
8S2590 Interchangeable interchangeable cross-reference
interchangeable
MS15718-41 Interchangeable interchangeable cross-reference
interchangeable
58-10190 Interchangeable interchangeable cross-reference
interchangeable
001-0320-02 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X1504?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X1504?
63X1504 is a SEAL,PLAIN ENCASED.
What parts can replace 63X1504?
There are 22 known substitutes for 63X1504: 16305, 188-5252, 8S2590 and 19 more. Substitute compatibility should be verified for your specific system.
Is 63X1504 still available?
63X1504 is currently cancelled.
Request a Quote — 63X1504