PartsTable / COMPONENT / 63X1186
63X1186
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 2.686 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1633, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X1186
NSN: 5330-00-292-1633 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style RECESSED seal_width 0.375 INCHES NOMINAL IN housing_bore_diameter 2.686 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.000 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-292-1633
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X1186
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
• MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
• TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
• HOUSING BORE DIAMETER: 2.686 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 2.000 INCHES NOMINAL IN COLOR BLACK MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS CASE STYLE SQUARE TEMP RATING -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF HOUSING BORE DIAMETER 2.686 INCHES NOMINAL IN HARDNESS RATING 80.0 SHORE DUROMETER A NOMINAL OVERALL SEAL WIDTH 0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1K6981 Interchangeable interchangeable cross-reference
interchangeable
2682 Interchangeable interchangeable cross-reference
interchangeable
19778 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable interchangeable cross-reference
interchangeable
63X1186 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X1186?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X1186?
63X1186 is a SEAL,PLAIN ENCASED.
What parts can replace 63X1186?
There are 10 known substitutes for 63X1186: 1K6981, 2682, 19778 and 7 more. Substitute compatibility should be verified for your specific system.
Is 63X1186 still available?
63X1186 is currently cancelled.
Request a Quote — 63X1186