PartsTable / COMPONENT / 63X0355
63X0355
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, housing_bore_diameter: 1.828 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9489, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X0355
NSN: 5330-00-285-9489 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.438 INCHES NOMINAL IN housing_bore_diameter 1.828 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 1.125 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-285-9489
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X0355
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
• HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS HOUSING BORE DIAMETER 1.828 INCHES NOMINAL IN MATERIAL STEEL CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT ACCOMMODATED SHAFT DIAMETER 1.125 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT SEALING ELEMENT STYLE ANGULAR CASE STYLE SQUARE SEAL WIDTH 0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
S637471 Interchangeable interchangeable cross-reference
interchangeable
140316 Interchangeable interchangeable cross-reference
interchangeable
DS2709 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X0355?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X0355?
63X0355 is a SEAL,PLAIN ENCASED.
What parts can replace 63X0355?
There are 4 known substitutes for 63X0355: S637471, 140316, DS2709 and 1 more. Substitute compatibility should be verified for your specific system.
Is 63X0355 still available?
63X0355 is currently cancelled.
Request a Quote — 63X0355