PartsTable
Technical Data Sheet
Download PDF

63D732369G1 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

63D732369G1: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, thickness: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, mounting_hole_type: UNTHREADED, mounting_hole_diameter: 0.290 INCHES NOMINAL ALL HOLES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-487-6280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63D732369G1
NSN: 5340-01-487-6280
FSC: 5340 — Hardware, Commercial
CAGE: 0177B — INDRA SISTEMAS, SOCIEDAD ANONIMA (ESP)
SPECIFICATIONS
shapeRECTANGULAR
width6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
thickness0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
mounting_hole_typeUNTHREADED
mounting_hole_diameter0.290 INCHES NOMINAL ALL HOLES IN
mounting_hole_quantity4
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-487-6280
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63D732369G1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.290 INCHES NOMINAL ALL HOLES IN
•
SHAPE: RECTANGULAR
•
WIDTH: 6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061
•
THICKNESS: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
•
MOUNTING HOLE TYPE: UNTHREADED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.290 INCHES NOMINAL ALL HOLES IN
SHAPERECTANGULAR
WIDTH6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061
THICKNESS0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
MOUNTING HOLE TYPEUNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
63D732369Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 63D732369G1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63D732369G1?
63D732369G1 is a PLATE,MOUNTING.
What parts can replace 63D732369G1?
There is 1 known substitute for 63D732369G1: 63D732369. Substitute compatibility should be verified for your specific system.
What is the NSN for 63D732369G1?
63D732369G1 is cataloged in the U.S. Government catalog under NSN 5340-01-487-6280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63D732369G1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.