PartsTable
Technical Data Sheet
Download PDF

63C11118 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

63C11118: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, design_type: CLAW ENGAGING, overall_width: 0.920 INCHES NOMINAL IN, overall_height: 1.070 INCHES NOMINAL IN, overall_length: 4.050 INCHES NOMINAL IN, style_designator: LEVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-509-5757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63C11118
NSN: 5340-00-509-5757
FSC: 5340 — Hardware, Commercial
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
design_typeCLAW ENGAGING
overall_width0.920 INCHES NOMINAL IN
overall_height1.070 INCHES NOMINAL IN
overall_length4.050 INCHES NOMINAL IN
style_designatorLEVER
surface_treatmentCADMIUM AND CHROMATE OVERALL
engaging_surface_width0.260 INCHES NOMINAL IN
engaging_surface_thickness0.260 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5340-00-509-5757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63C11118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 0.260 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.070 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH0.260 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
OVERALL LENGTH4.050 INCHES NOMINAL IN
OVERALL WIDTH0.920 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
ENGAGING SURFACE THICKNESS0.260 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
26L1-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 63C11118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63C11118?
63C11118 is a CATCH,CLAMPING.
What parts can replace 63C11118?
There is 1 known substitute for 63C11118: 26L1-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 63C11118?
63C11118 is cataloged in the U.S. Government catalog under NSN 5340-00-509-5757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63C11118