PartsTable
Technical Data Sheet
Download PDF

63A7-8452 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

63A7-8452: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, surface_treatment: PASSIVATE CASE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-178-3772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63A7-8452
NSN: 5330-00-178-3772
FSC: 5330 — Packing and Gasket Materials
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
surface_treatmentPASSIVATE CASE
housing_bore_diameter1.004 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter0.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-178-3772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63A7-8452 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
HOUSING BORE DIAMETER: 1.004 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER1.004 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
COLORBLACK
ACCOMMODATED SHAFT DIAMETER0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
60051Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
VP6475Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 63A7-8452?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63A7-8452?
63A7-8452 is a SEAL,PLAIN ENCASED.
What parts can replace 63A7-8452?
There are 2 known substitutes for 63A7-8452: 60051, VP6475. Substitute compatibility should be verified for your specific system.
What is the NSN for 63A7-8452?
63A7-8452 is cataloged in the U.S. Government catalog under NSN 5330-00-178-3772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63A7-8452

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.