PartsTable
Technical Data Sheet
Download PDF

6395382-01 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6395382-01: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: GLASS FIBER, first_leg_angle: 94.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.000 INCHES NOMINAL IN, first_leg_length: 2.580 INCHES NOMINAL IN, second_leg_angle: 40.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-2599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6395382-01
NSN: 5340-01-516-2599
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialGLASS FIBER
first_leg_angle94.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width3.000 INCHES NOMINAL IN
first_leg_length2.580 INCHES NOMINAL IN
second_leg_angle40.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width3.000 INCHES NOMINAL IN
special_featuresMATERIAL IS VINYLESTER RESIN, INFUSED E-GLASS FABRIC (FIBERGLASS)
style_designatorADJACENT ANGLES
second_leg_length1.770 INCHES NOMINAL IN
mounting_hole_typePLAIN
NSN5340-01-516-2599
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6395382-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.000 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 94.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.313 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 40.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.625 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 3.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.770 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.000 INCHES NOMINAL IN
FIRST LEG ANGLE94.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.313 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE40.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.625 INCHES NOMINAL IN
SECOND LEG WIDTH3.000 INCHES NOMINAL IN
SECOND LEG LENGTH1.770 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH1.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6393680 FIND NO 070Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 6395382-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6395382-01?
6395382-01 is a BRACKET,DOUBLE ANGLE.
What parts can replace 6395382-01?
There is 1 known substitute for 6395382-01: 6393680 FIND NO 070. Substitute compatibility should be verified for your specific system.
What is the NSN for 6395382-01?
6395382-01 is cataloged in the U.S. Government catalog under NSN 5340-01-516-2599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6395382-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.