PartsTable
Technical Data Sheet
Download PDF

6395381-2 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6395381-2: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: GLASS FIBER, overall_height: 0.432 INCHES NOMINAL IN, overall_length: 60.800 INCHES NOMINAL IN, special_features: MATERIAL IS VINYLESTER RESIN, INFUSED E-GLASS FABRIC (FIBERGLASS), mounting_hole_type: PLAIN, mounting_hole_diameter: 0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-2579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6395381-2
NSN: 5340-01-516-2579
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialGLASS FIBER
overall_height0.432 INCHES NOMINAL IN
overall_length60.800 INCHES NOMINAL IN
special_featuresMATERIAL IS VINYLESTER RESIN, INFUSED E-GLASS FABRIC (FIBERGLASS)
mounting_hole_typePLAIN
mounting_hole_diameter0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
mounting_hole_quantity5
end_item_identificationMIDBODY FAIRING: W/S: SEAL DELIVERY VEHICLE
part_name_assigned_by_controlling_agencyC-BAR, FAIRING SUPPORT
NSN5340-01-516-2579
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6395381-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
MOUNTING HOLE DIAMETER: 0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
•
MATERIAL: GLASS FIBER
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
OVERALL HEIGHT0.432 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
OVERALL LENGTH60.800 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IS VINYLESTER RESIN, INFUSED E-GLASS FABRIC (FIBERGLASS)
PART NAME ASSIGNED BY CONTROLLING AGENCYC-BAR, FAIRING SUPPORT
END ITEM IDENTIFICATIONMIDBODY FAIRING: W/S: SEAL DELIVERY VEHICLE
MATERIALGLASS FIBER
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6393680 FIND NO 065Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 6395381-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6395381-2?
6395381-2 is a BRACKET,MOUNTING.
What parts can replace 6395381-2?
There is 1 known substitute for 6395381-2: 6393680 FIND NO 065. Substitute compatibility should be verified for your specific system.
What is the NSN for 6395381-2?
6395381-2 is cataloged in the U.S. Government catalog under NSN 5340-01-516-2579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6395381-2