PartsTable
Technical Data Sheet
Download PDF

6395081-14 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6395081-14: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, first_leg_angle: 40.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.375 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-514-0019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6395081-14
NSN: 5340-01-514-0019
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY
first_leg_angle40.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.375 INCHES NOMINAL IN
first_leg_length0.750 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.375 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length5.250 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.250 INCHES NOMINAL IN
second_leg_thickness0.250 INCHES NOMINAL IN
NSN5340-01-514-0019
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6395081-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.438 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 40.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.375 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 5.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.438 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
FIRST LEG ANGLE40.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
SECOND LEG WIDTH1.375 INCHES NOMINAL IN
SECOND LEG LENGTH5.250 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.690 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
6395081Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6395081-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6395081-14?
6395081-14 is a BRACKET,ANGLE.
What parts can replace 6395081-14?
There is 1 known substitute for 6395081-14: 6395081. Substitute compatibility should be verified for your specific system.
What is the NSN for 6395081-14?
6395081-14 is cataloged in the U.S. Government catalog under NSN 5340-01-514-0019. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6395081-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.