PartsTable
Technical Data Sheet
Download PDF

6394981-02 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6394981-02: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY AND RUBBER NEOPRENE, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN, special_features: BRACKET IS 0.125 INCH THICK; PAD IS 0.250 INCH THICK - MAY BE BUILT UP WITH LAYERS TO GET NECESSARY THICKNESS IN, features_provided: CUSHION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-6072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6394981-02
NSN: 5340-01-509-6072
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY AND RUBBER NEOPRENE
overall_width0.750 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
special_featuresBRACKET IS 0.125 INCH THICK; PAD IS 0.250 INCH THICK - MAY BE BUILT UP WITH LAYERS TO GET NECESSARY THICKNESS IN
features_providedCUSHION
mounting_hole_typePLAIN
mounting_hole_diameter0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
mounting_hole_quantity1
part_name_assigned_by_controlling_agencyBRACKET, DEPTH SENSOR
NSN5340-01-509-6072
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6394981-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MOUNTING HOLE DIAMETER: 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CUSHION
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT0.375 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
OVERALL LENGTH3.250 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
FEATURES PROVIDEDCUSHION
SPECIAL FEATURESBRACKET IS 0.125 INCH THICK; PAD IS 0.250 INCH THICK - MAY BE BUILT UP WITH LAYERS TO GET NECESSARY THICKNESS IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET, DEPTH SENSOR
MATERIALNICKEL ALLOY AND RUBBER NEOPRENE
MOUNTING HOLE TYPEPLAIN
SUBSTITUTES & CROSS-REFERENCES 1
6394981Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6394981-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6394981-02?
6394981-02 is a BRACKET,MOUNTING.
What parts can replace 6394981-02?
There is 1 known substitute for 6394981-02: 6394981. Substitute compatibility should be verified for your specific system.
What is the NSN for 6394981-02?
6394981-02 is cataloged in the U.S. Government catalog under NSN 5340-01-509-6072. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6394981-02