PartsTable
Technical Data Sheet
Download PDF

6394546 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6394546: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, first_leg_angle: 28.0 DEGREES NOMINAL, first_leg_length: 2.250 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 6.770 INCHES NOMINAL IN, mounting_hole_type: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-519-4780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6394546
NSN: 5340-01-519-4780
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
first_leg_angle28.0 DEGREES NOMINAL
first_leg_length2.250 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length6.770 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.125 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
mounting_hole_diameter0.218 INCHES NOMINAL IN
NSN5340-01-519-4780
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6394546 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 28.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 6.770 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
MOUNTING HOLE DIAMETER: 0.218 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.125 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.125 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 2.250 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5052
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE28.0 DEGREES NOMINAL
SECOND LEG LENGTH6.770 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
MOUNTING HOLE DIAMETER0.218 INCHES NOMINAL IN
SECOND LEG THICKNESS0.125 INCHES NOMINAL IN
FIRST LEG THICKNESS0.125 INCHES NOMINAL IN
FIRST LEG LENGTH2.250 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5052
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6394546?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6394546?
6394546 is a BRACKET,ANGLE.
What is the NSN for 6394546?
6394546 is cataloged in the U.S. Government catalog under NSN 5340-01-519-4780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6394546

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.