6394155 — BRACKET,MOUNTING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

6394155: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 1.120 INCHES NOMINAL IN, overall_height: 1.500 INCHES NOMINAL IN, overall_length: 8.440 INCHES NOMINAL IN, surface_treatment: PRIMER AND PAINT, mounting_hole_type: COUNTERBORED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-4782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6394155

NSN: 5340-01-509-4782
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 6061
overall_width	1.120 INCHES NOMINAL IN
overall_height	1.500 INCHES NOMINAL IN
overall_length	8.440 INCHES NOMINAL IN
surface_treatment	PRIMER AND PAINT
mounting_hole_type	COUNTERBORED
mounting_hole_diameter	0.212 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
mounting_hole_quantity	2
material_document_and_classification	ASTM B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency	BRACKET, MOUNTING, BUNK
surface_treatment_document_and_classification	MIL-DTL-24441/20, FORMULA 150, TYPE III MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-24441/29, FORMULA 150, TYPE IV MIL SPEC 2ND TREATMENT RESPONSE
NSN	5340-01-509-4782

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING HOLE QUANTITY: 2

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-24441/20, FORMULA 150, TYPE III MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-24441/29, FORMULA 150, TYPE IV MIL SPEC 2ND TREATMENT RESPONSE

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE

•

MOUNTING HOLE DIAMETER: 0.212 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MOUNTING HOLE QUANTITY	2
OVERALL HEIGHT	1.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-DTL-24441/20, FORMULA 150, TYPE III MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-24441/29, FORMULA 150, TYPE IV MIL SPEC 2ND TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER	0.212 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
OVERALL LENGTH	8.440 INCHES NOMINAL IN
OVERALL WIDTH	1.120 INCHES NOMINAL IN
SPECIAL FEATURES	BOTTOM EDGE HAS LIP 0.120 IN. W X 0.44 H WITH CUTOUT ON EACH SIDE AT TOP EDGE OF LIP, 0.38 W X 0.19 H; MOUNTING HOLES ARE C'BORED 0.373-0.380 AND ARE CENTERED 1.000 FROM BOTTOM EDGE AND 1.720 FROM EACH SIDE EDGE; ALSO HAS 1 HOLE ON EACH SIDE EDGE THD FOR 0.190-32 UNC-2B HELICAL COIL INSERT, CENTERED 0.500 FROM BACK EDGE AND 1.250 FROM BOTTOM EDGE W
SURFACE TREATMENT	PRIMER AND PAINT
PART NAME ASSIGNED BY CONTROLLING AGENCY	BRACKET, MOUNTING, BUNK

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 6394155?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6394155?

6394155 is a BRACKET,MOUNTING.

What is the NSN for 6394155?

6394155 is cataloged in the U.S. Government catalog under NSN 5340-01-509-4782. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6394155 — BRACKET,MOUNTING

Request a Quote — 6394155