PartsTable
Technical Data Sheet
Download PDF

6392767-4 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6392767-4: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, special_features: MATERIAL IS RUBBER, NEOPRENE, style_designator: MORTISE PLATE, material_thickness: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-3581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6392767-4
NSN: 5340-01-516-3581
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_quantity1
overall_width1.500 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
special_featuresMATERIAL IS RUBBER, NEOPRENE
style_designatorMORTISE PLATE
material_thickness0.375 INCHES NOMINAL IN
mounting_hole_diameter0.278 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
NSN5340-01-516-3581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6392767-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: MORTISE PLATE
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MOUNTING HOLE DIAMETER: 0.278 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.375 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORMORTISE PLATE
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MOUNTING HOLE DIAMETER0.278 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
OVERALL LENGTH2.000 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.375 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IS RUBBER, NEOPRENE
MATERIALUNABLE TO DECODE
HOLE QUANTITY1
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6395225 FIND 99Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6392767-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6392767-4?
6392767-4 is a STRIKE,CATCH.
What parts can replace 6392767-4?
There is 1 known substitute for 6392767-4: 6395225 FIND 99. Substitute compatibility should be verified for your specific system.
What is the NSN for 6392767-4?
6392767-4 is cataloged in the U.S. Government catalog under NSN 5340-01-516-3581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6392767-4