PartsTable
Technical Data Sheet
Download PDF

6392577-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6392577-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: GLASS FIBER, first_leg_angle: 11.5 RADIANS MINIMUM AND 12.5 RADIANS MAXIMUM, first_leg_style: SQUARE, first_leg_width: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, first_leg_length: 1.180 INCHES MINIMUM AND 1.220 INCHES MAXIMUM IN, special_features: MARK 53711-6392577-1 ON TAG OR BAG IAW MIL-STD-130. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-523-7282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6392577-1
NSN: 5340-01-523-7282
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialGLASS FIBER
first_leg_angle11.5 RADIANS MINIMUM AND 12.5 RADIANS MAXIMUM
first_leg_styleSQUARE
first_leg_width0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
first_leg_length1.180 INCHES MINIMUM AND 1.220 INCHES MAXIMUM IN
special_featuresMARK 53711-6392577-1 ON TAG OR BAG IAW MIL-STD-130
style_designatorANGLE
second_leg_length0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
second_leg_thickness0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
first_leg_hole_diameter0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
NSN5340-01-523-7282
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6392577-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.315 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 11.5 RADIANS MINIMUM AND 12.5 RADIANS MAXIMUM
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG LENGTH: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.315 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.207 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
FIRST LEG ANGLE11.5 RADIANS MINIMUM AND 12.5 RADIANS MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG LENGTH0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4181. POM 112 ASSN STD SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5793216 FIND 018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6392577-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6392577-1?
6392577-1 is a BRACKET,ANGLE.
What parts can replace 6392577-1?
There is 1 known substitute for 6392577-1: 5793216 FIND 018. Substitute compatibility should be verified for your specific system.
What is the NSN for 6392577-1?
6392577-1 is cataloged in the U.S. Government catalog under NSN 5340-01-523-7282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6392577-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.