6391037-4 — SHEET,METAL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

6391037-4: SHEET,METAL.

The SHEET,METAL is a the manufacturer industrial component. Key specifications include width: 12.000 INCHES NOMINAL IN, length: 37.440 INCHES NOMINAL IN, material: ALUMINUM ALLOY 5052, heat_treatment: H-32 STRAIN HARDENED, basic_shape_style: SOLID, end_item_identification: REDUCER, LCL HEAT EXCHANGERS; ASDS. This part is cataloged in the U.S.

Government catalog under NSN 9535-01-509-9643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6391037-4

NSN: 9535-01-509-9643
FSC: 9535 — Plate, Sheet, Strip, and Foil; Nonferrous Base Metal
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

width	12.000 INCHES NOMINAL IN
length	37.440 INCHES NOMINAL IN
material	ALUMINUM ALLOY 5052
heat_treatment	H-32 STRAIN HARDENED
basic_shape_style	SOLID
end_item_identification	REDUCER, LCL HEAT EXCHANGERS; ASDS
cross-sectional_thickness	0.0600 INCHES NOMINAL IN
material_document_and_classification	ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency	COVER, OUTER
NSN	9535-01-509-9643

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 37.440 INCHES NOMINAL IN

•

CROSS-SECTIONAL THICKNESS: 0.0600 INCHES NOMINAL IN

•

HEAT TREATMENT: H-32 STRAIN HARDENED

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE

•

BASIC SHAPE STYLE: SOLID

•

WIDTH: 12.000 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

LENGTH	37.440 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS	0.0600 INCHES NOMINAL IN
HEAT TREATMENT	H-32 STRAIN HARDENED
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE
BASIC SHAPE STYLE	SOLID
SPECIAL FEATURES	LEFT/SHORT SIDE IS CUTOUT FROM POINT 1.53 IN. FROM TOP AT 55 DEG. TO POINT 10.875 DOWN & 12.75 FROM LEFT EDGE, THEN STRAIGHT DOWN TO BOTTOM EDGE; RIGHT SIDE HAS SIMILAR CUTOUT FROM 1.53 DOWN TO POINT 10.875 DOWN & 12.75 FROM RIGHT EDGE, THEN STRAIGHT TO BOTTOM; COVER BENDS UP AT 4.0 DEG. ANGLE, 1.56 IN. FROM TOP EDGE AND BENDS DOWN AGAIN, AT SAME ANGLE, 10.44 FROM TOP EDGE; THERE ARE 20 HOLES, 0.096-0.101, DRILLED THRU, 4 EACH IN TOP AND BOTTOM RECTANGULAR AREAS AND 8 ON EACH SLANTED EDGE - SEE DRAWING FOR DETAILS; THERE ARE ALSO 6 HOLES, 0.248-0.253, CENTERED 0.375 FROM TOP EDGE AND 5.263, 10.639, 16.023, 21.399, 26.783, AND 32.159 FROM LEFT EDGE IN
WIDTH	12.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCY	COVER, OUTER
END ITEM IDENTIFICATION	REDUCER, LCL HEAT EXCHANGERS; ASDS
MATERIAL	ALUMINUM ALLOY 5052

SUBSTITUTES & CROSS-REFERENCES 2

6391037Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

6391037-02 FIND 4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 6391037-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6391037-4?

6391037-4 is a SHEET,METAL.

What parts can replace 6391037-4?

There are 2 known substitutes for 6391037-4: 6391037, 6391037-02 FIND 4. Substitute compatibility should be verified for your specific system.

What is the NSN for 6391037-4?

6391037-4 is cataloged in the U.S. Government catalog under NSN 9535-01-509-9643. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6391037-4 — SHEET,METAL

Request a Quote — 6391037-4