PartsTable
Technical Data Sheet
Download PDF

6391002-1 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6391002-1: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, second_leg_angle: 90.0 DEGREES NOMINAL, style_designator: ADJACENT ANGLES, second_leg_length: 0.450 INCHES NOMINAL IN, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-519-1159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6391002-1
NSN: 5340-01-519-1159
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
second_leg_angle90.0 DEGREES NOMINAL
style_designatorADJACENT ANGLES
second_leg_length0.450 INCHES NOMINAL IN
surface_treatmentPASSIVATE
center_section_width3.250 INCHES NOMINAL IN
center_section_height5.120 INCHES NOMINAL IN
NSN5340-01-519-1159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6391002-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 0.450 INCHES NOMINAL IN
•
CENTER SECTION WIDTH: 3.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ADJACENT ANGLES
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: ALUMINUM ALLOY 6061
•
CENTER SECTION HEIGHT: 5.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH0.450 INCHES NOMINAL IN
CENTER SECTION WIDTH3.250 INCHES NOMINAL IN
STYLE DESIGNATORADJACENT ANGLES
SURFACE TREATMENTPASSIVATE
MATERIALALUMINUM ALLOY 6061
CENTER SECTION HEIGHT5.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6391002-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6391002-1?
6391002-1 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 6391002-1?
6391002-1 is cataloged in the U.S. Government catalog under NSN 5340-01-519-1159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6391002-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.