PartsTable
Technical Data Sheet
Download PDF

63785-2 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

63785-2: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, closed_length: 10.969 INCHES MINIMUM AND 11.031 INCHES MAXIMUM IN, extended_length: 22.093 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), special_features: HOLES 0.177 IN. DIA.

3 HOLES 0.500 IN. DIA IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-252-6754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63785-2
NSN: 5340-00-252-6754
FSC: 5340 — Hardware, Commercial
CAGE: 9Y580 — L3HARRIS TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
materialALUMINUM ALLOY OVERALL
closed_length10.969 INCHES MINIMUM AND 11.031 INCHES MAXIMUM IN
extended_length22.093 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
special_featuresHOLES 0.177 IN. DIA. 3 HOLES 0.500 IN. DIA IN
surface_treatmentANODIZE OVERALL
side_for_which_designedLEFT HAND
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-252-6754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63785-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 22.093 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
CLOSED LENGTH: 10.969 INCHES MINIMUM AND 11.031 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH22.093 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
CLOSED LENGTH10.969 INCHES MINIMUM AND 11.031 INCHES MAXIMUM IN
SPECIAL FEATURESHOLES 0.177 IN. DIA. 3 HOLES 0.500 IN. DIA IN
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
SIDE FOR WHICH DESIGNEDLEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 63785-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63785-2?
63785-2 is a SLIDE,DRAWER,EXTENSION.
What is the NSN for 63785-2?
63785-2 is cataloged in the U.S. Government catalog under NSN 5340-00-252-6754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63785-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.