63750-2 ITEM 18CP — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

63750-2 ITEM 18CP: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, special_features: GREEN STRIPE; CLEANING,PACKAGING AND MARKING IAW MIL-STD-1330D, center_hole_diameter: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, specification/standard_data: 80205-NAS1611 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-288-7154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

63750-2 ITEM 18CP

NSN: 5331-01-288-7154
FSC: 5331 — O-ring
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
special_features	GREEN STRIPE; CLEANING,PACKAGING AND MARKING IAW MIL-STD-1330D
center_hole_diameter	0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
specification/standard_data	80205-NAS1611 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
criticality_code_justification	FEAT
material_document_and_classification	NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
NSN	5331-01-288-7154

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CRITICALITY CODE JUSTIFICATION: FEAT

•

MATERIAL DOCUMENT AND CLASSIFICATION: NAS1613 ASSN STD SINGLE MATERIAL RESPONSE

•

SPECIFICATION/STANDARD DATA: 80205-NAS1611 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

CENTER HOLE DIAMETER: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION	FEAT
MATERIAL DOCUMENT AND CLASSIFICATION	NAS1613 ASSN STD SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA	80205-NAS1611 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURES	GREEN STRIPE; CLEANING,PACKAGING AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER	0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 4

63750-2 ITEM 18Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1611-018Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1613Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

NAS1611-018CPReference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 63750-2 ITEM 18CP?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 63750-2 ITEM 18CP?

63750-2 ITEM 18CP is a O-RING.

What parts can replace 63750-2 ITEM 18CP?

There are 4 known substitutes for 63750-2 ITEM 18CP: 63750-2 ITEM 18, NAS1611-018, NAS1613 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 63750-2 ITEM 18CP?

63750-2 ITEM 18CP is cataloged in the U.S. Government catalog under NSN 5331-01-288-7154. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

63750-2 ITEM 18CP — O-RING

Request a Quote — 63750-2 ITEM 18CP