PartsTable
Technical Data Sheet
Download PDF

636E004-254 — STUD,PLAIN

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

636E004-254: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416, thread_class: 2A STUD THREAD A, thread_length: 0.400 INCHES MINIMUM AND 1.400 INCHES MAXIMUM STUD THREAD IN, overall_length: 2.100 INCHES NOMINAL IN, nominal_thread_size: 0.3125 INCHES STUD THREAD IN, thread_quantity_per_inch: 18 STUD THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5307-01-701-3135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
636E004-254
NSN: 5307-01-701-3135
FSC: 5307 — Studs
CAGE: 05259 — CONTAINER RESEARCH CORP DBA CONTAINER RESEARCH CORP DIV CONTAINR RESEARCH CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 416
thread_class2A STUD THREAD A
thread_length0.400 INCHES MINIMUM AND 1.400 INCHES MAXIMUM STUD THREAD IN
overall_length2.100 INCHES NOMINAL IN
special_features2 SECTIONS OF THREADED LENGTHS, 0.400 INCHES (NOM) AND 1.400 INCHES (NOM);0.124 INCH (MIN) AND 0.129 INCH (MAX) THRU-HOLE LOCATED 0.150 INCHES (NOM) FROM END IN
nominal_thread_size0.3125 INCHES STUD THREAD IN
thread_quantity_per_inch18 STUD THREAD
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) STUD THREAD
NSN5307-01-701-3135
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 636E004-254 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.400 INCHES MINIMUM AND 1.400 INCHES MAXIMUM STUD THREAD IN
•
NOMINAL THREAD SIZE: 0.3125 INCHES STUD THREAD IN
•
THREAD CLASS: 2A STUD THREAD A
•
THREAD QUANTITY PER INCH: 18 STUD THREAD
•
MATERIAL: STEEL COMP 416
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) STUD THREAD
TECHNICAL CHARACTERISTICS
THREAD LENGTH0.400 INCHES MINIMUM AND 1.400 INCHES MAXIMUM STUD THREAD IN
OVERALL LENGTH2.100 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.3125 INCHES STUD THREAD IN
SPECIAL FEATURES2 SECTIONS OF THREADED LENGTHS, 0.400 INCHES (NOM) AND 1.400 INCHES (NOM);0.124 INCH (MIN) AND 0.129 INCH (MAX) THRU-HOLE LOCATED 0.150 INCHES (NOM) FROM END IN
THREAD CLASS2A STUD THREAD A
THREAD QUANTITY PER INCH18 STUD THREAD
MATERIALSTEEL COMP 416
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) STUD THREAD
SUBSTITUTES & CROSS-REFERENCES 1
636E004Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 636E004-254?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 636E004-254?
636E004-254 is a STUD,PLAIN.
What parts can replace 636E004-254?
There is 1 known substitute for 636E004-254: 636E004. Substitute compatibility should be verified for your specific system.
What is the NSN for 636E004-254?
636E004-254 is cataloged in the U.S. Government catalog under NSN 5307-01-701-3135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 636E004-254

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.