PartsTable
Technical Data Sheet
Download PDF

636E004-247 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

636E004-247: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: FLAT AND RECTANGULAR, width: 0.250 INCHES NOMINAL IN, length: 3.000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, TYPE 6, thickness: 0.475 INCHES NOMINAL IN, overall_height: 0.855 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-701-3015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
636E004-247
NSN: 5340-01-701-3015
FSC: 5340 — Hardware, Commercial
CAGE: 05259 — CONTAINER RESEARCH CORP DBA CONTAINER RESEARCH CORP DIV CONTAINR RESEARCH CORPORATION (USA)
SPECIFICATIONS
shapeFLAT AND RECTANGULAR
width0.250 INCHES NOMINAL IN
length3.000 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061, TYPE 6
thickness0.475 INCHES NOMINAL IN
overall_height0.855 INCHES NOMINAL IN
mounting_hole_diameter0.1875 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM SINGLE HOLE IN
mounting_hole_quantity1
slot_width_and_quantity0.390 INCHES NOMINAL TWO SLOTS IN
slot_length_and_quantity0.700 INCHES NOMINAL TWO SLOTS IN
part_name_assigned_by_controlling_agencyCLAMPING RING
NSN5340-01-701-3015
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 636E004-247 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
LENGTH: 3.000 INCHES NOMINAL IN
•
SLOT WIDTH AND QUANTITY: 0.390 INCHES NOMINAL TWO SLOTS IN
•
MOUNTING HOLE DIAMETER: 0.1875 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM SINGLE HOLE IN
•
SHAPE: FLAT AND RECTANGULAR
•
SLOT LENGTH AND QUANTITY: 0.700 INCHES NOMINAL TWO SLOTS IN
•
WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT0.855 INCHES NOMINAL IN
LENGTH3.000 INCHES NOMINAL IN
SLOT WIDTH AND QUANTITY0.390 INCHES NOMINAL TWO SLOTS IN
MOUNTING HOLE DIAMETER0.1875 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM SINGLE HOLE IN
SHAPEFLAT AND RECTANGULAR
SLOT LENGTH AND QUANTITY0.700 INCHES NOMINAL TWO SLOTS IN
WIDTH0.250 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMPING RING
MATERIALALUMINUM ALLOY 6061, TYPE 6
SUBSTITUTES & CROSS-REFERENCES 1
636E004Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 636E004-247?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 636E004-247?
636E004-247 is a PLATE,MOUNTING.
What parts can replace 636E004-247?
There is 1 known substitute for 636E004-247: 636E004. Substitute compatibility should be verified for your specific system.
What is the NSN for 636E004-247?
636E004-247 is cataloged in the U.S. Government catalog under NSN 5340-01-701-3015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 636E004-247

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.