PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 636077 NON-ASBESTOS
636077 NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include material: GRAPHITE AND STEEL OVERALL, outside_diameter: 11.575 INCHES MINIMUM AND 11.575 INCHES MINIMUM AND 11.655 INCHES MAXIMUM11.655 INCHES MAXIMUM IN, special_features: CONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 11.285 INCHES MINIMUM AND 11.285 INCHES MINIMUM AND 11.305 INCHES MAXIMUM11.305 INCHES MAXIMUM IN, cross-sectional_thickness: 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-393-0052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
636077 NON-ASBESTOS
NSN: 5330-01-393-0052
FSC: 5330
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialGRAPHITE AND STEEL OVERALL
outside_diameter11.575 INCHES MINIMUM AND 11.575 INCHES MINIMUM AND 11.655 INCHES MAXIMUM11.655 INCHES MAXIMUM IN
special_featuresCONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter11.285 INCHES MINIMUM AND 11.285 INCHES MINIMUM AND 11.305 INCHES MAXIMUM11.305 INCHES MAXIMUM IN
cross-sectional_thickness0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-393-0052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 636077 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
•
MATERIAL: GRAPHITE AND STEEL OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 11.285 INCHES MINIMUM AND 11.285 INCHES MINIMUM AND 11.305 INCHES MAXIMUM11.305 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
•
OUTSIDE DIAMETER: 11.575 INCHES MINIMUM AND 11.575 INCHES MINIMUM AND 11.655 INCHES MAXIMUM11.655 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
MATERIALGRAPHITE AND STEEL OVERALL
CROSS-SECTIONAL THICKNESS0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL
APERTURE DIAMETER11.285 INCHES MINIMUM AND 11.285 INCHES MINIMUM AND 11.305 INCHES MAXIMUM11.305 INCHES MAXIMUM IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
OUTSIDE DIAMETER11.575 INCHES MINIMUM AND 11.575 INCHES MINIMUM AND 11.655 INCHES MAXIMUM11.655 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
114782Interchangeable
interchangeable cross-reference
interchangeable
103493Interchangeable
interchangeable cross-reference
interchangeable
355-07AInterchangeable
interchangeable cross-reference
interchangeable
03161Interchangeable
interchangeable cross-reference
interchangeable
43161Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 636077 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 636077 NON-ASBESTOS?
636077 NON-ASBESTOS is a GASKET,SPIRAL WOUND.
What parts can replace 636077 NON-ASBESTOS?
There are 5 known substitutes for 636077 NON-ASBESTOS: 114782, 103493, 355-07A and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 636077 NON-ASBESTOS?
636077 NON-ASBESTOS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-393-0052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 636077 NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026