PartsTable
Technical Data Sheet

63315ZZNR/5S — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

63315ZZNR/5S: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 75.00 MILLIMETERS NOMINAL MM, overall_width: 2.6875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-150-1220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63315ZZNR/5S
NSN: 3110-01-150-1220
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 23043 — N T N BEARING CORP OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter75.00 MILLIMETERS NOMINAL MM
overall_width2.6875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
lubrication_materialGREASE
overall_outside_diameter160.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-01-150-1220
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 63315ZZNR/5S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
•
OVERALL OUTSIDE DIAMETER: 160.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
OVERALL WIDTH2.6875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER160.00 MILLIMETERS NOMINAL MM
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
BORE SHAPESTRAIGHT
SUBSTITUTES & CROSS-REFERENCES 1
944-148Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 63315ZZNR/5S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63315ZZNR/5S?
63315ZZNR/5S is a BEARING,BALL,ANNULAR.
What parts can replace 63315ZZNR/5S?
There is 1 known substitute for 63315ZZNR/5S: 944-148. Substitute compatibility should be verified for your specific system.
What is the NSN for 63315ZZNR/5S?
63315ZZNR/5S is cataloged in the U.S. Government catalog under NSN 3110-01-150-1220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63315ZZNR/5S