PartsTable
Technical Data Sheet
Download PDF

6317B-SS-2528-7 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6317B-SS-2528-7: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, nut_diameter: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN, pilot_length: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-326-2708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6317B-SS-2528-7
NSN: 5310-01-326-2708
FSC: 5310 — Nuts and Washers
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
nut_diameter0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
pilot_length0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
pilot_diameter0.353 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle45.0 DEGREES NOMINAL BOSS
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
NSN5310-01-326-2708
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6317B-SS-2528-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OR ASTM A2756 ASSN STD 1ST MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.303 INCHES MINIMUM AND 0.318 INCHES MAXIMUM BOSS IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
•
COUNTERBORE DIAMETER: 0.294 INCHES MINIMUM AND 0.301 INCHES MAXIMUM BOSS IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OR ASTM A2756 ASSN STD 1ST MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.303 INCHES MINIMUM AND 0.318 INCHES MAXIMUM BOSS IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
COUNTERBORE DIAMETER0.294 INCHES MINIMUM AND 0.301 INCHES MAXIMUM BOSS IN
PILOT DIAMETER0.353 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
PILOT LENGTH0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6317B-SS-2528-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6317B-SS-2528-7?
6317B-SS-2528-7 is a NUT,PLAIN,CLINCH.
What is the NSN for 6317B-SS-2528-7?
6317B-SS-2528-7 is cataloged in the U.S. Government catalog under NSN 5310-01-326-2708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6317B-SS-2528-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.