PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 630694C91
630694C91 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.9055 INCHES NOMINAL IN, bore_diameter: 2.5591 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1200 INCHES MAXIMUM IN, retainer_fabrication_method: PRESSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-099-0022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
630694C91
NSN: 3110-01-099-0022
FSC: 3110
CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.9055 INCHES NOMINAL IN
bore_diameter2.5591 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1200 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-099-0022
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 630694C91 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.5591 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1200 INCHES MAXIMUM IN
•
CONE WIDTH: 0.9055 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.5591 INCHES NOMINAL IN
CONE CORNER RADIUS0.1200 INCHES MAXIMUM IN
CONE WIDTH0.9055 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
7035Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
H6094Interchangeable
interchangeable cross-reference
interchangeable
19150Interchangeable
interchangeable cross-reference
interchangeable
6094Interchangeable
interchangeable cross-reference
interchangeable
8738197Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 630694C91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 630694C91?
630694C91 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 630694C91?
There are 28 known substitutes for 630694C91: 7035, AMS-QQ-A-200/8, H6094 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 630694C91?
630694C91 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-099-0022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 630694C91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026