PartsTable
Technical Data Sheet
Download PDF

6302670 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6302670: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: TWO-PIECE, outside_diameter: 18.248 INCHES MINIMUM AND 18.287 INCHES MAXIMUM IN, retainer_thickness: 1.4565 INCHES NOMINAL IN, material_document_and_classification: MIL-R-7362,T2 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-345-4719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6302670
NSN: 5330-01-345-4719
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionTWO-PIECE
outside_diameter18.248 INCHES MINIMUM AND 18.287 INCHES MAXIMUM IN
retainer_thickness1.4565 INCHES NOMINAL IN
material_document_and_classificationMIL-R-7362,T2 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
NSN5330-01-345-4719
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6302670 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 18.248 INCHES MINIMUM AND 18.287 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-7362,T2 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
•
RETAINER THICKNESS: 1.4565 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER18.248 INCHES MINIMUM AND 18.287 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-7362,T2 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE PACKING
RETAINER THICKNESS1.4565 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC PACKING
MATERIALALUMINUM ALLOY 6061 RETAINER
CONSTRUCTIONTWO-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6302670?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6302670?
6302670 is a PACKING WITH RETAINER.
What is the NSN for 6302670?
6302670 is cataloged in the U.S. Government catalog under NSN 5330-01-345-4719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6302670