6300799-7-32 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

6300799-7-32: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, thread_length: 1.797 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-348-3232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6300799-7-32

NSN: 5305-01-348-3232
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLAT CHAMFER
head_height	0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
thread_length	1.797 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
fastener_length	1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
hardness_rating	38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE OVERALL
width_across_flats	0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
internal_drive_style	HEXAGON
NSN	5305-01-348-3232

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 1.797 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN

•

HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL

•

NOMINAL THREAD DIAMETER: 0.438 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
HEAD HEIGHT	0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
FASTENER LENGTH	1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	1.797 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
HARDNESS RATING	38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER	0.438 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

SUBSTITUTES & CROSS-REFERENCES 2

NAS1352-7-32PReference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

MS16997-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 6300799-7-32?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6300799-7-32?

6300799-7-32 is a SCREW,CAP,SOCKET HEAD.

What parts can replace 6300799-7-32?

There are 2 known substitutes for 6300799-7-32: NAS1352-7-32P, MS16997-125. Substitute compatibility should be verified for your specific system.

What is the NSN for 6300799-7-32?

6300799-7-32 is cataloged in the U.S. Government catalog under NSN 5305-01-348-3232. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6300799-7-32 — SCREW,CAP,SOCKET HEAD

Request a Quote — 6300799-7-32