PartsTable
Technical Data Sheet
Download PDF

6300-77-423-2715 — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6300-77-423-2715: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON AND COPPER ALLOY OVERALL, outside_diameter: 1.594 INCHES MINIMUM AND 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM1.624 INCHES MAXIMUM IN, special_features: CONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 1.281 INCHES MINIMUM AND 1.281 INCHES MINIMUM AND 1.311 INCHES MAXIMUM1.311 INCHES MAXIMUM IN, cross-sectional_thickness: 0.057 INCHES MINIMUM AND 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM0.067 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-407-2354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6300-77-423-2715
NSN: 5330-01-407-2354
FSC: 5330 — Packing and Gasket Materials
CAGE: 48422 — WILLIAM POWELL COMPANY, THE DBA POWELL VALVE DIV THE STARFLO CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON AND COPPER ALLOY OVERALL
outside_diameter1.594 INCHES MINIMUM AND 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM1.624 INCHES MAXIMUM IN
special_featuresCONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter1.281 INCHES MINIMUM AND 1.281 INCHES MINIMUM AND 1.311 INCHES MAXIMUM1.311 INCHES MAXIMUM IN
cross-sectional_thickness0.057 INCHES MINIMUM AND 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM0.067 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-407-2354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6300-77-423-2715 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.057 INCHES MINIMUM AND 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM0.067 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 1.594 INCHES MINIMUM AND 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM1.624 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.281 INCHES MINIMUM AND 1.281 INCHES MINIMUM AND 1.311 INCHES MAXIMUM1.311 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
•
MATERIAL: PLASTIC POLYAMIDE NYLON AND COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.057 INCHES MINIMUM AND 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM0.067 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER1.594 INCHES MINIMUM AND 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM1.624 INCHES MAXIMUM IN
APERTURE DIAMETER1.281 INCHES MINIMUM AND 1.281 INCHES MINIMUM AND 1.311 INCHES MAXIMUM1.311 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIALCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
MATERIALPLASTIC POLYAMIDE NYLON AND COPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
07742Reference document
Same NSN cross-reference
Reference document — Secondary reference
07742-327-1500 NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Secondary reference
07742-327-1500Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6300-77-423-2715?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6300-77-423-2715?
6300-77-423-2715 is a GASKET,SPIRAL WOUND.
What parts can replace 6300-77-423-2715?
There are 3 known substitutes for 6300-77-423-2715: 07742, 07742-327-1500 NON-ASBESTOS, 07742-327-1500. Substitute compatibility should be verified for your specific system.
What is the NSN for 6300-77-423-2715?
6300-77-423-2715 is cataloged in the U.S. Government catalog under NSN 5330-01-407-2354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6300-77-423-2715

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.