PartsTable
Technical Data Sheet
Download PDF

630051763760000 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

630051763760000: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN, material: PLASTIC POLYTETRAFLUOROETHYLENE TOP RING, inside_diameter: 0.567 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, outside_diameter: 0.927 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN, cross-sectional_shape_style: ANGLE BOTTOM RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-606-9155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
630051763760000
NSN: 5330-00-606-9155
FSC: 5330 — Packing and Gasket Materials
CAGE: 05176 — TRI-STATE SUPPLY CO OF NEW YORK (USA)
SPECIFICATIONS
height1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
materialPLASTIC POLYTETRAFLUOROETHYLENE TOP RING
inside_diameter0.567 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
outside_diameter0.927 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN
intermediate_ring_quantity1
cross-sectional_shape_styleANGLE BOTTOM RING
NSN5330-00-606-9155
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 630051763760000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 1
•
OUTSIDE DIAMETER: 0.927 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE BOTTOM RING
•
INSIDE DIAMETER: 0.567 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
HEIGHT: 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE BOTTOM RING
TECHNICAL CHARACTERISTICS
INTERMEDIATE RING QUANTITY1
OUTSIDE DIAMETER0.927 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEANGLE BOTTOM RING
INSIDE DIAMETER0.567 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
HEIGHT1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE BOTTOM RING
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INTERMEDIATE RING
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE TOP RING
SUBSTITUTES & CROSS-REFERENCES 1
F-26189Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 630051763760000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 630051763760000?
630051763760000 is a PACKING ASSEMBLY.
What parts can replace 630051763760000?
There is 1 known substitute for 630051763760000: F-26189. Substitute compatibility should be verified for your specific system.
What is the NSN for 630051763760000?
630051763760000 is cataloged in the U.S. Government catalog under NSN 5330-00-606-9155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 630051763760000