PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 63-292193
63-292193 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 10.312 INCHES NOMINAL IN, first_hole_diameter: 0.406 INCHES NOMINAL IN, pin_overall_diameter: 1.2500 INCHES NOMINAL IN, second_hole_diameter: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-425-4804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63-292193
NSN: 5315-00-425-4804
FSC: 5315
CAGE: 09348 — LUCAS WESTERN INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length10.312 INCHES NOMINAL IN
first_hole_diameter0.406 INCHES NOMINAL IN
pin_overall_diameter1.2500 INCHES NOMINAL IN
second_hole_diameter0.406 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.094 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes9.500 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.406 INCHES NOMINAL IN
NSN5315-00-425-4804
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 63-292193 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.406 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.094 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
SECOND HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.406 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.094 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HOLE ARRANGEMENT STYLEBOTH END DRILLED
SECOND HOLE DIAMETER0.406 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER1.2500 INCHES NOMINAL IN
PIN OVERALL LENGTH10.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2838Interchangeable
IBM 10/100Mbps PCI Ethernet IOA
interchangeable
D15-648GPC183-184Interchangeable
interchangeable cross-reference
interchangeable
CV9-S5330-9 ALT E REV 4 (PC-183)Interchangeable
interchangeable cross-reference
interchangeable
F09G3R50BInterchangeable
interchangeable cross-reference
interchangeable
FNM-31/2Interchangeable
interchangeable cross-reference
interchangeable
MS90085-56-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 63-292193?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63-292193?
63-292193 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 63-292193?
There are 12 known substitutes for 63-292193: 2838, D15-648GPC183-184, CV9-S5330-9 ALT E REV 4 (PC-183) and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 63-292193?
63-292193 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-425-4804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63-292193

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026