PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 63-2176
63-2176 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 4.003 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-0996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63-2176
NSN: 5330-00-154-0996
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-0996
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63-2176 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
7755658P017Interchangeable
interchangeable cross-reference
interchangeable
CJ2A13XInterchangeable
interchangeable cross-reference
interchangeable
10482Interchangeable
interchangeable cross-reference
interchangeable
500179Interchangeable
interchangeable cross-reference
interchangeable
D2HZ 4813-AInterchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 63-2176?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63-2176?
63-2176 is a SEAL,PLAIN ENCASED.
What parts can replace 63-2176?
There are 20 known substitutes for 63-2176: 7755658P017, CJ2A13X, 10482 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 63-2176?
63-2176 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-0996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63-2176

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026