PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 63-017
63-017 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 63-017 is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 18.8 OVERALL, head_style: ROOF, head_height: 0.160 INCHES NOMINAL IN, head_diameter: 0.540 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-6234, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
63-017
NSN: 5330-00-250-6234
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 18.8 OVERALL
head_styleROOF
head_height0.160 INCHES NOMINAL IN
head_diameter0.540 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.190 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identification6115-01-591-1161;GENERATOR,HEATING AND AIR CONDITIONER
nominal_thread_diameter0.310 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
extended_washer_thickness0.030 INCHES NOMINAL IN
NSN5330-00-250-6234
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 63-017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: RECESSED
•
MATERIAL: RUBBER SEALING ELEMENT
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.730 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLERECESSED
MATERIALRUBBER SEALING ELEMENT
SEAL WIDTH0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.730 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
0917299Interchangeable
interchangeable cross-reference
interchangeable
0917299-0Interchangeable
interchangeable cross-reference
interchangeable
917299Interchangeable
interchangeable cross-reference
interchangeable
BM11378-100Interchangeable
interchangeable cross-reference
interchangeable
WW-P-471Interchangeable
interchangeable cross-reference
interchangeable
AA59616BDQBCECInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 63-017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63-017?
63-017 is a 63-017.
What parts can replace 63-017?
There are 11 known substitutes for 63-017: 0917299, 0917299-0, 917299 and 8 more. Substitute compatibility should be verified for your specific system.
Is 63-017 still available?
63-017 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 63-017

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026