PartsTable
Technical Data Sheet
Download PDF

62A81D9-11 — PIN,SHOULDER,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

62A81D9-11: PIN,SHOULDER,HEADED.

The PIN,SHOULDER,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, first_end_style: CHAMFERED, special_features: ONE DRILLED HOLE,0.125 IN. DIA LOCATED 0.250 IN.

FROM SHANK END IN, style_designator: SHOULDER. This part is cataloged in the U.S. Government catalog under NSN 5315-00-895-9226, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62A81D9-11
NSN: 5315-00-895-9226
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
first_end_styleCHAMFERED
special_featuresONE DRILLED HOLE,0.125 IN. DIA LOCATED 0.250 IN. FROM SHANK END IN
style_designatorSHOULDER
first_step_length0.060 INCHES NOMINAL IN
pin_head_diameter0.720 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
third_step_length2.160 INCHES NOMINAL IN
under_head_length3.555 INCHES NOMINAL IN
second_step_length1.335 INCHES NOMINAL IN
NSN5315-00-895-9226
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 62A81D9-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
FIRST STEP DIAMETER: 0.468 INCHES NOMINAL IN
•
THIRD STEP DIAMETER: 0.494 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 3.555 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SECOND STEP LENGTH: 1.335 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
•
PIN HEAD DIAMETER: 0.720 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
FIRST STEP DIAMETER0.468 INCHES NOMINAL IN
THIRD STEP DIAMETER0.494 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
UNDER HEAD LENGTH3.555 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SECOND STEP LENGTH1.335 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
PIN HEAD DIAMETER0.720 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
HEAD STYLEFLAT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 62A81D9-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62A81D9-11?
62A81D9-11 is a PIN,SHOULDER,HEADED.
What is the NSN for 62A81D9-11?
62A81D9-11 is cataloged in the U.S. Government catalog under NSN 5315-00-895-9226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62A81D9-11