PartsTable
Technical Data Sheet
Download PDF

6297551 — BRACKET,T

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6297551: BRACKET,T.

The BRACKET,T is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES NOMINAL, material: ALUMINUM ALLOY 6061, leg_thickness: 0.562 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, base_thickness: 0.137 INCHES NOMINAL IN, overall_height: 0.637 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-414-1490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6297551
NSN: 5340-01-414-1490
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
angle90.0 DEGREES NOMINAL
materialALUMINUM ALLOY 6061
hole_quantity3
leg_thickness0.562 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
base_thickness0.137 INCHES NOMINAL IN
overall_height0.637 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
special_featuresTHD HOLE IN LEG 0.312-024 UNF 3B THRU
style_designatorCENTER PROJECTION
surface_treatmentANODIZE
mounting_hole_typeCOUNTERBORED AND COUNTERSUNK
NSN5340-01-414-1490
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6297551 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY2 CL2 MIL SPEC SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: CENTER PROJECTION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-22/8-T6511 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.637 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TY2 CL2 MIL SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATORCENTER PROJECTION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-22/8-T6511 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.219 INCHES NOMINAL IN
OVERALL LENGTH1.625 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
ANGLE90.0 DEGREES NOMINAL
DISTANCE FROM END TO LEG ALONG LENGTH0.531 INCHES NOMINAL IN
SPECIAL FEATURESTHD HOLE IN LEG 0.312-024 UNF 3B THRU
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6297551?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6297551?
6297551 is a BRACKET,T.
What is the NSN for 6297551?
6297551 is cataloged in the U.S. Government catalog under NSN 5340-01-414-1490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6297551

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.