PartsTable
Technical Data Sheet
Download PDF

629361 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

629361: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_style: END RADIUS, first_leg_width: 0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, first_leg_length: 0.880 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN, second_leg_style: END RADIUS, second_leg_width: 0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-160-2867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
629361
NSN: 5340-01-160-2867
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL
first_leg_styleEND RADIUS
first_leg_width0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
first_leg_length0.880 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
special_features2ND LEG CONTAINS A JOG DOWN OF 0.219 RADIANS MIN TO 0.281 RADIANS MAX
style_designatorANGLE
second_leg_length1.375 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
first_leg_end_radius0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NSN5340-01-160-2867
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 629361 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.375 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SECOND LEG WIDTH0.480 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SECOND LEG LENGTH1.375 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
FIRST LEG STYLEEND RADIUS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 629361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 629361?
629361 is a BRACKET,ANGLE.
What is the NSN for 629361?
629361 is cataloged in the U.S. Government catalog under NSN 5340-01-160-2867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 629361

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.